Posts Tagged ‘stephenson’

PB15 Class

Sunday, April 18th, 2010
Total Number of Engines Built 203
First Engine Built 1899
Last Engine Built 1924
First Engine Written Off 1941
Last Engine Written Off 1970
Number of Engines in Class on the Books as at:
31/12/00 31/12/10 31/12/20 31/12/30 31/12/40 31/12/50 31/12/60 31/12/66 31/12/67 31/12/68 31/12/69 31/12/70
16 132 202 202 202 170 161 118 100 67 25
Number of Engines in Class in Service as at:
31/12/67 31/12/68 7/10/69
65 34 20

Notes

This class was the most significant and successful of the locomotives designed in the nineteenth century. The design resulted from a need for more powerful engines for passenger trains. Initially designated as “Passenger” B15, they were later better known as PB15.

They spent many of their early years hauling important passenger trains around the state. With the strengthening of the main lines they were relieved of most of these tasks by more powerful locomotives. Later they were relegated to lesser duties on branch lines and in shunting yards. Engines attached to Wooloongabba and later at Mayne were used on “Southside” suburban passenger trains until 1968.

A number of modifications including cab alterations and fitting of electric headlights were carried out during their lives. Tenders on engines constructed at Toowoomba Foundry and the one at Ipswich had increased water capacity. Some engines based at Cairns had additional boards on their tenders to enable additional coal to be carried. Several engines were fitted with an additional sandbox and electric light on the tender for working on branch lines where no turning facilities were available. In May 1918, Ipswich Workshops converted N°411 into a tank engine. Evidently the results were not completely satisfactory as the engine returned to its original form in March 1922. In the late 1920s, the boiler pressure was increased from 150psi to 160 psi.

They could run on all parts of the system except the Etheridge line, the isolated Normanton and (now closed) Cooktown Lines.

One engine was built in 1924 for the Aramac Shire Council. This engine was subsequently purchased from the Council when the Aramac Shire Tramway was dieselized in 1958. Numbered A1 in Council service, it first ran on QR in February 1958 as N°1052 but was renumbered N°12 in June of that year. This was the only engine of the class to be constructed at Ipswich Workshops.

In 1924, increasing traffic on lines that could not carry C16 engines resulted in orders being placed for an engine of similar proportions but fitted with Walschaerts valve gear. These engines became PB15 (1924) Class.

In November 1969, nineteen members of the class were still operating; eleven in the Mackay District, and four at Maryborough and four at Ipswich.

*Originally 8 x 7½. The larger pumps were fitted between 1928 and 1942

Abbreviations

EAP – Evans, Anderson, Phelan & Co, Brisbane, Qld
Ipswich – Ipswich Workshops, Qld
Kitson – Kitson & Coy, Leeds, UK
Toowoomba – Toowoomba Foundry Ltd, (Southern Cross Works) Toowoomba, Qld
Walkers – Walkers Limited, Engineers, Maryborough, Qld

C13 Dubs – Originally Small Consolation Class

Sunday, April 18th, 2010
Total Number of Engines Built 6
First Engine Built 1883
Last Engine Built 1883
First Engine Written Off 1922
Last Engine Written Off 1927

Notes

These engines were originally referred to as Small Consolations and later as C13 (Dubs) to distinguish them from the C13 engines built by Baldwin.

They were acquired for use on the Bundaberg and Maryborough Railways. Although based on the American designed 2-8-0, they were obtained from a British manufacturer to comply with government policy of the time. They were original built with diamond shaped chimneys, shallow fireboxes and short smokeboxes.

There were complaints that when the Bundaberg engines entered service they were pushing curves out of alignment on the Mount Perry Railway. This is not surprising as most of the line still consisted of 30lb rail as relaying with 41¼lb material had only recently commenced

The class was modified in 1904-05 with a raised boiler with deep firebox and extended smokebox. This improved their performance and gave them an appearance similar to the B13 Class.

In 1889 locomotives and rollingstock were consolidated into one rollingstock register. This resulted in most items, except those operating on the original Southern and Western Railway (from Ipswich), being renumbered. Numbers shown are state (or former S & W) numbers. Those in brackets are former numbers of individual railways.

Abbreviations

MR – Maryborough Railway
BR – Bundaberg Railway based on (North) Bundaberg
Dubs – Dubs & Co, Glasgow